"Flat" COILPRO PEMF Coils (Air Core) - 100 to 200+ Gauss magnetic flux density output.
Regular price$99.99 USDSale
Flat design makes it great for laying down on it, to use for your back, shoulders, etc.
High Gauss output (100 to 200+ Gauss, depending on Coil and Current) for deeper penetration.
Work with all Wavemaster Controllers with RCA plugs. (note: We can customize the connector end to your specification if you have your own Controller. A small fee may apply if you use an expensive connector style. We will let you know the cost before proceeding. Contact email@example.com for more info).
Covered with soft fabric, the bare enameled copper pictures are so you can see what is underneath. (Color may vary slightly due to lighting while pictures were taken).
Available in 3 inch, 4 inch and 6 inch diameters. Larger diameters, such as 8 inch, 12 inch, or even larger now available on request.
Wound with enameled magnet wire and fully cured with protective coatings, then wrapped with comfortable, durable fabric.
RCA Plug connectors provide easy connect and disconnect from Controller for cleaning or storage.
The 3" and 4" COILPRO coils can be used for the fingers to the upper arm as well as the back. The 6" COILPRO coil is for the toes to above the knees, although the 6" COILPRO coil will work for the entire arm as well. We have tried to accommodate the most common sizes to suit most people, however, we'd be happy to wind coils to suit your specific needs.
You can either place the affected area inside the COILPRO coil, or place an open side of the COILPRO coil on to or near the affected area.
For example, to use for the shoulders, back and other hard to reach areas, simply place the open side of any size COILPRO coil on the affected area. For arms and legs, place the affected area inside the COILPRO coil.
All COILPRO PEMF Coils have a resistance of approximately 3 to 6 Ohms, depending on the size and wire gauge used.
The COILPRO Coil cores are made of enameled magnet wire then the windings are coated with special insulating materials that won't crack, chip or become brittle.
The special coatings also resist weathering, chemicals, impact, and abrasion while allowing the natural beauty of the copper to shine through.
The cable from the COILPRO Coil to the Controller is approximately 5 feet long and is terminated with a Male RCA Plug. It is securely fastened to the Coil with a cable gland and epoxy resin.