*NEW-Dec.1/17* - 360 Watts of Power! The Wavemaster Model PC-15 - A Complete PEMF Therapy System
Regular price$499.99 USDSale
Our highest power output to date! Dual Micro Processor Controller delivers 15 Amps at 24 Volts DC to a COILPRO Coil or Anti-Nano Bucket! Use with your own Coils, Triangles and Buckets as well since the Power Module is computer controlled to regulate output voltage and current. Comes with 24 Volts DC Power Supply but works with any Power Supply down to 12 Volts DC.
We've also added a User Adjustable Shutdown Timer. The timer allows the Controller to shut down after 10, 20, 30, 40, 50, 60 minutes and after 10 hours. (Default shut down time is 60 minutes). Great for using in bed while relaxing, in case you fall asleep.
Need to adjust the Pulse Width? No problem!Select 30, 35, 40, 45, 50, 55 or 60% Duty Cycle.
Please note: Power Supply shown is 24 Volts DC @ 4.75 Amps. The System actually comes with a 24 Volts DC @ 10 Amps Power Supply for a total of 240 Watts of power. More pictures and videos coming soon to show higher current. Substitute the Anti-Nano Bucket for the COILPRO 3" Coil at no additional charge. We will add the proper pictures shortly.
This is a complete PEMF Therapy Solution. Great for localized as well as complete body pain relief, bone and tissue regeneration. It is proven to help depression, fatigue and provides an immediate energy boost while increasing oxygen levels in the blood stream.
The 3" and 4" COILPRO coils are used for the fingers to the upper arm. The 6" COILPRO coil is for the toes to above the knees, although the 6" COILPRO coil will work for the entire arm as well. We have tried to accommodate the most common sizes to suit most people, however, we'd be happy to wind coils to suit your specific needs.
You can either place the affected area inside the COILPRO coil, or place an open side of the COILPRO coil on to or near the affected area.
For example, to use for the shoulders, back and other hard to reach areas, simply place the open side of any size COILPRO coil on the affected area. For arms and legs, place the affected area inside the COILPRO coil.
Includes: (newest software changes highlighted in yellow)
Wavemaster Model PC-15 Controller in a sleek, easy to use enclosure
Dual Outputs for using one or two COILPRO Coils at a time.
15 AMPS to the Coil(s). Please note, amperage depends on the coil resistance.
Variable Frequency and Power Control, user adjustable
Exact frequency selection and display via BLUE LCD readout.
Easy to use. Simply press and hold the "START/STOP" key until the controller displays "New Freq?= ". Vary the frequency with the precision frequency dial (lockable) to set it to the value you want to output to the Coil(s). Press "START/STOP" to start the controller with the selected frequency.
Press the "Set Off Timer" button and select from 10 minutes to 10 hours.
Press the "Set Pulse Width" button and select 30, 35, 40, 45, 50, 55 or 60% Duty Cycle.
Solid state, pure square wave Pulse Controller is adjustable from 1Hz to 100Hz (1 to 100 cycles per second, this can be modified during build to your exacting specifications) via an on board precision potentiometer dial control. The lower frequencies are used for relaxing and/or healing while the higher frequencies heal and stimulate at the same time.
Frequency now increments in 0.1 Hz steps.
Precision potentiometer for frequency adjustment has digital dial scale with mechanical lock.
An LED light Pulses ON each time current is delivered to the Coil such that the pulses shine faster as the frequency is increased.
Adjustable power level, from Minimum to Maximum range of Input Power, via Potentiometer Dial Control yields approximately 20 to 150+ Gauss output capability depending on Coil Configuration. We can design a System to your exact specification if desired, just ask us...
Schottky Diode "Back (Reverse) EMF Suppression" circuitry built-in for the discriminating user
Your choice of three (3), four (4) or six (6) inch diameter newly designed "COILPRO-BAMBOO CORE" Coil wound with pure copper enameled magnet wire and 5 foot long cable with RCA Type quick connectors. The Bamboo Cores are lighter and have higher Magnetic Flux Permeability for more Magnetic Flux delivery to the intended target region(s). Center-mounted, flexible strain relief cable allows for easy reversal of the Coil position to change from North to South Magnetic field.
Connect the COILPRO Coil(s) with the supplied RCA Plug.
24 Volts DC @ 10 AMPS (250 Watts) Laptop Style Power Supply with Quick Connector
Power ON/OFF Switch
Controller Dimensions: 4.61" W x 7.5" L x 2.36" H Controller Weight: approx. 27 oz. (766 grams)
Available Options (see the "Accessories" category):
Car Lighter Plug Adapter - Use your Wavemaster~COIL~ in your car or from any other 12Vdc Source with a Car Lighter Plug
Car Adapter Distribution Kit - Provides three (3) extra 12VDc Sockets that you can use for your PEMF System, a Ground Strap or to charge your USB devices.
Comprehensive User Manual will be released shortly.
Magnetic Flux and Frequency measurements can be viewed here: